DIY Simple Side Table

Evan here again! So for a while, I hate to admit it, we were using my old TV tray as a side table. Hey. It fit. But it was not a good long term solution for two picky DIY artists. By this time (back in 2013 actually, sorry for such a late update!), I had gotten my woodworking confidence up, but I had not done any major projects with woodworking yet. So let me share my first one with you:

DIY simple side table - evanandkatelyn.com

Muuuch better, right? This journey was not the smoothest… At first I was inspired by this pallet I found:

IMG_4802

It seems like they are all the rage in the DIY community. I must have had really bad luck. This was some super heavy duty super nailed together super pallet. But not super good for getting good wood from. I really did try. Then I put it in the scrap pile and went to Home Depot.

IMG_4804

Got some nice real wood (no plywood for my first big project!) All the same width. All I needed to do was cut them to length and start joining!

IMG_4809

This was before I had more toys tools in my arsenal garage, so I made do with some scrap wood to help me cut. Prooobably not recommended. A table saw would have been muuuuch better. Now that I have one (a shoutout of thanks to my brother and sister in law here for hooking me up for our wedding (yes, this project was that long ago)) I know how awesome it is.

DIY simple side table - evanandkatelyn.com

Once cut to size (measure, measure, measure, cut) I did a test fit! Looks good so far. I went with a nice basic shape (a blocky A?). To join them I drilled holes and glued in dowels! If I were to do this again, I would have used screws and counter-bores then capped them with tiny lengths of dowels on top (picture below sums it up better). I used dowels instead of just screws so that the entire outside of the side table would be wood (say that 5 times fast… wait, I just did it too and it’s not that hard, please ignore).

Pro_Plug_Wood_Installation_diagram-02

But this was my first project so I just went for it.

IMG_4814

Not the prettiest work but that is why I bought wood filler.

IMG_4818

Katelyn helped me out with joining them all together with the dowels and glue (and therefore we didn’t get too many pictures of the process). But I did get this gem:

IMG_4952

Once everything was joined it was time to liberally apply wood filler.

DIY simple side table - evanandkatelyn.com

When it all started to look awesome is actually when I took the sander to the side table. It started to feel like a finished product. All the rough edges or mismatches were worn away and it came together into one piece.

DIY simple side table - evanandkatelyn.com

And if sanding is when it started to look finished, staining is when it really DID look finished. This might be the most satisfying step because there is such a large change for fairly low effort. I’ve adopted the wipe on, wipe off method. Get the stain on the wood and wipe it off right away.

IMG_5098

Since this was going to be a piece of furniture we would use regularly and possibly with drinks/spills/condensation, I went ahead and sealed it too.

DIY simple side table - evanandkatelyn.com

Hope this post helps people at the beginning of their DIY adventure like I was to jump in and try their hand at something new, or get a more experienced hand out into their workshop again :)

,

2 Responses to DIY Simple Side Table

  1. Marissa Bartlett January 10, 2015 at 10:45 pm #

    Hi! Just found your blog through Pinterest and I LOVE it! I know this post is a few months old but I just wanted to say that this project came out amazing! My husband and I tried to do a diy pallet table a while back and had sooo much trouble getting screws into the wood… we ended up going over to a friend’s shop and using their high power screw gun and even then it was still difficult. The table came out awesome but it was a pain in the butt! Thanks for sharing!

    • Katelyn Sheline January 14, 2015 at 7:43 pm #

      Thank you so much! Omg, pallets are such a pain to deal with- kudos to you guys! Would love to see your finished product!

Leave a Reply