DIY Faux Fur Tree Skirt (and Garland!)

Avatar Katelyn | December 20, 2016 141 Views 0 Likes 0 Ratings

In yesterday’s Christmas decor post I mentioned we added some faux fur in both tree skirt and garland form. As promised, today I’m sharing this quick DIY you can do in an afternoon (ie you can finish it before the Christmas!) Bonus: this tree skirt only cost about $15 as opposed to the $69 versions elsewhere and you get a free garland out of the material too.

First my mom (thanks mom!) picked up some faux fur fabric from Jo-Ann’s. I opted for a tawny light brown color, but a warm white would look great too. The size you need will depend on your tree, but for our 7.5ft tree we went with a 60″ x 60″ square (human below for reference).

Then we flipped it over and marked the center.

After we had our center point, we could trace out our circle. There are several ways to do this: eyeball it, trace something big like a hula hoop, etc. My husband is an engineer so of course it involved magnets, a ruler, and pure precision.

So we put magnets on top of the center point and one under the fabric to hold them in place. Then we placed one end of our yardstick, which had a hole in it, over the magnets and used it as a compass. You could do the same thing by tying a string to the magnets in the center and using that as your compass.

By placing a marker at the end of your ruler (or your string) and rotating it around the center point, you’ll create a perfect circle.


I’d recommend taking it outside to cut it because you are gonna get fur everywhere. I may look like I’m simply draped in a luxurious fur hanging out in my garage, but really I’m trying to cut it and not let it touch the ground at the same time. Evan only laughed at me for a minute before snapping a picture and helping me hold it :P

We cut along the circle and we also cut one line from the edge of the circle to the center point (so you can slide the center to the base of the tree).

Side note: our garage is insane. Lotsssss of different projects in progress. We’ll clean it… one day.

After cutting the circle out, shake it like a crazy person in your driveway or wherever you think you’ll gather the most attention from curious neighbors.

Bonus points if you get airborne while shaking it out.

We wrapped it around the base of the tree, putting the cut to the center in the back. Some of our edges were a little rough but we kinda feel like it gives it a more realistic look.

Of course… once we added presents you can barely see it.

But I know it’s there and I love it and that’s what matters!!!! Plus, as the presents disappear, the tree won’t look so sad and barren.

Part two of this tutorial is what we did with the scraps! We had a big ring of fur left, so I trimmed off the corners which left a circle of fabric. I took that and wrapped it around the baby tree in our office. It’s a nice tie in to our big tree, and it’s a super easy way to add visual impact to a without needing to hang ornaments.

Well there you have it! This was an easy and fun project that took very little time to complete – aka the perfect thing to tackle when you’re already counting down the days til Christmas!

Note: This post contains affiliated links. Thank you for supporting our blog!


This post currently has one response.

Leave a Reply