Tag Archives | bedroom

IKEA MALM dresser hack

Today we’re going to show you how we used $35-per-dresser worth of hardware to upgraded a couple IKEA Malms that until recently, looked like this:

DIY Dresser Upgrade And now… it looks like this!

You can watch the video that covers everything below, or keep scrolling for all our choices, steps, and tips in blog-format.

[Before we keep going, I want to pause and say if you have a second it would mean SO much to us if you’d like our video or subscribe to our channel. Since we’re brand new to YouTube, every view, like, and subscription makes a huge difference for us. Click here to see the whole channel. Thank youuuuu! We’re doing a big goofy happy dance right now!]

We were inspired by this discontinued West Elm Dresser to do knobs on the top row of drawers and pulls on the rest. If you want to check out the backstory and challenges we faced about hardware and dressers (riveting, I know) before I get to the actual tutorial, click here to read our last post.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com This ended up being a really simple tutorial that you could definitely tackle on a weeknight after work with just a few tools. Below is what we used:

Materials

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com Tools

We also ended up needing bolt cutters, a wrench, and a spare nut that fit onto our screw because we ran into a little snag with our screw length (more details on that later).

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com The first thing you have to do it make a big mess of your room by emptying all your drawers. Just think of it as an opportunity to get rid of that Panic at the Disco t-shirt that’s been shoved in the back for years.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com Then you’ll need to measure your drawers and mark each spot to drill for your hardware. Double check your measurements because having a bunch of mistake-holes in your dresser is a good way to ruin it.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com For the pulls, we measured the width of the drawer front, then the width between the two holes in each pull. We subtracted the pull-width from the drawer-width and divided that number in two, which told us how far we needed to measure from each side of our drawer. We centered those marks vertically.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com The knobs were easier. We just eyeballed what positioning looked good, made sure they were equally spaced width-wise from the outside edge of the drawer, and centered those vertically too.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com We recommend placing your hardware on each drawer front where you’ve marked before you drill. This gives you a visual check of how you did. When you feel confident that your ability to do simple math has resulted in the correct placement of your hardware, it’s time to get out the drill.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com To pick the right bit size, you can hold your screw up to several different sized bits and pick one that is just a hair thicker than your screw.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com We really like using a drill guide (that little metal bar we’re drilling through) to help us drill straight down (instead of at an angle). If you’re nervous about drilling through perfectly good furniture, I highly recommend getting one of these little guys.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com After drilling, we did hit a bit of a snag. See, hardware will typically come with screws, and ours came with two different screw size options. But sadly, we had a Goldilocks moment and one was too long and one was too short, but neither was juuuust right.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com This is a common issue to run into, so we’re going to share a little tip (so you can avoid going to Home Depot for the 10th time that day to pick up new screws).

Grab a set of bolt cutters and a nut that’s sized to fit your screw. Thread the nut onto the screw, then cut the too-long screw to  the length you need.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com Cutting it will deform the threads slightly, but that’s where the nut comes in. Grab the nut with a wrench and use your screwdriver to back the screw out of the nut. As you rotate it off over the damaged threads, it will re-shape them back to normal and boom, you have a perfectly-sized screw!

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com The next step is to simply attach your hardware with your screws. You can use a normal screwdriver or a powered screwdriver depending on what you have.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com Then just add your drawers (I guess you can put your clothes back now too) and give yourself a high five because you’re done!

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com This project really was super easy, and it ended up only costing us $35 per dresser. In my book, that is WAY better than dishing out hundreds (or even thousands!) on something new.

West Elm copycat IKEA hack, DIY dresser upgrade using knobs and pulls - evanandkatelyn.com Before…

DIY Dresser Upgrade After!

………………………………………………………………
You can also find us at:

YouTube (all our DIY videos)
Instagram (sneak peeks @evanandkatelyn)
Patreon (if you wanna support us, but no pressure!)
Pinterest (stuff that inspires us)
Twitter (us, in 140 character doses)
Facebook (be our friend)
Instructables (straight up tutorials)
………………………………………………………………
Note: This post contains affiliate links. Thank you for supporting us!

1

Knobs, pulls, and dressers, oh my!

Hey guys! If you know me, you know I can go a little overboard when I go into research-mode. Sometimes it makes sense, like researching everything thoroughly before we swapped out some plumbing or blew our own insulation. But sometimes, I’ll spend hours upon hours researching something really trivial, like knobs.

Real quick spoiler alert: if you wanna see how these dressers turned out, watch the video below! And read the full tutorial here.

It all started when the IKEA Malm dressers got recalled for a tipping hazard. We have two of these in our bedroom, and IKEA gave everyone the option of handing them over in exchange for a full refund.

Dresser and hardware inspiration - evanandkatelyn.com

So I was like yay, an excuse a chance to upgrade our dresser AND get $200 back! I started an online hunt to find the perfect new dressers, with these requirements in mind:

  1. Something at least as large as our current eight-drawer double-Malm set up.
  2. Nicer quality than our current dressers (otherwise, why upgrade?)
  3. Within the price range we felt comfortable spending.  

Apparently, I am a very unreasonable person, because we didn’t find anything that met all three of those needs. We could find something that met 1 and 2, or 1 and 3, or 2 and 3, but nothing that made the clouds part and the dresser heavens sing.

So I had to accept that functionally-speaking, we really had no complaints about our Malms, and the day for a dresser upgrade was not this day. Womp.

But here’s where the story takes an upturn. I decided as a consolation prize, I’d upgrade our current dressers with some new hardware. This launched me down a knobs-and-pulls rabbit hole that posed some challenges because:

  1. I wanted to do a mix of knobs AND pulls, inspired by this West Elm dresser (which is sadly no longer available). This meant I couldn’t just buy eight of the same thing for our eight drawers: I had to find six pulls and four knobs, and they had to match.
  2. I wanted gold/brass hardware to match the gold deer head and gold art in our bedroom gallery wall. Plus, I think gold always warms up black (and I prefer a warmer black to a cooler black). Despite its growing trendiness lately, gold hardware still has a smaller selection online than other finishes.
  3. Hardware can get expensive (think $16 a pull and $8 a knob, on the mid-priced end) and the dressers themselves were only $100 each, so it seemed weird to spend tons of money on hardware.

Dresser and hardware inspiration - evanandkatelyn.com

Again, tons and tons of research was done (how are there so many knobs in the world??) but eventually I emerged victorious! I found these knobs and these pulls, did a big ol’ happy dance, and asked for them for Christmas (that’s a normal present to ask for… right?). Spoiler alert – I got em! So keep your eye out for a soon-to-be-posted tutorial on our dresser makeover.

Dresser and hardware inspiration - evanandkatelyn.com

In the end I’d say this is a win, even though I mayyyy have lost a little sleep (and several hours of my life) to researching bedroom furniture. So instead of having all that research go to waste, I’m sharing it at the end of the post here. Hopefully, it will prevent some of you from spending as much time as I did in Dresserville and Knobs-and-Pulls-City. Below are our final contenders, and I’ve included all the important information we compared.

Dressers we liked

West Elm Logan dresser in acorn
$899, 58″w x 18″d x 32″h, solid wood base + wood veneer finish

Dresser and hardware inspiration - evanandkatelyn.com

This one was so pretty and we really loved the warmth of the wood, plus the price seemed reasonable for something so nice, but it wasn’t as big as our old set up and we couldn’t afford to have less storage than before.

West Elm Logan 6-Drawer Dresser
$936, 58″w x 18″d x 32″h, solid wood base + wood veneer finish

Dresser and hardware inspiration - evanandkatelyn.com

Love the mix of wood and metal on this one! Price still wasn’t too bad, though same issue with storage – it just wasn’t quite big enough,

IKEA Hemnes 8-Drawer Dresser
$249, 63″w x 19 5/8″d x 37 3/8″h, particle board
Dresser and hardware inspiration - evanandkatelyn.com

The price was right and the size was much better for this dresser, but we weren’t sure if we wanted to buy another IKEA dresser since we already had one we liked well enough. But if you’re looking for a large, inexpensive dresser, I love the lines and double top drawers on this one.

Munich 6 Drawer Double Dresser
$339, 59.29″w x16.5″d x32.75″h, particle board

Dresser and hardware inspiration - evanandkatelyn.com

This one gave us similar vibes as the West Elm Logan with the mix of metal and wood tones. As usual, same problem in that it wasn’t quite big enough for us, but we still think this is a great dresser that looks pricier than it is.

Hardware we liked

Dresser and hardware inspiration - evanandkatelyn.com

01. CB2 hex brushed brass drawer pull
$4.95 each. I LOVED the look of these, and generally I love hexagons, but we always end up choosing the geometric design so I wanted to try something different.

02. All Modern QMI cone novelty knob
$4.24 each. Good price and nice, tiny, and simple.

03. Liberty Artesia knob
$5.18 each. Really cool look, but in the end I wanted something with a bit of curve to balance the straight pulls.

04. Kohler Purist/Stillness cabinet knob
$12.30 each. The most classic design, but a little pricier.

Pulls we liked

Dresser and hardware inspiration - evanandkatelyn.com

01. Amerock Manor cup pull
$14.05 each (plus shipping). These were really cool and I love the look of a cup pull, but they were a little more than we wanted to spend since we needed six of them.

02. Skylight Bar Pull
$15.99 each. Again, a little pricey since we needed so many… but I love the way these look!

03. Hampton Collection bar pull
$7.95 each. Another pretty option, especially if you’re looking for a warmer toned gold.

04. Hickory Hardware Metropolis center bar pull
$7.84 each. Another solid option for a great price.

Hope this post helps someone else in their search for the perfect dresser/dresser upgrade!

Note: This post contains affiliated links. Thank you for supporting our blog!
2

Bedroom art + how to mockup a gallery wall

After having our flooring installed in the bedrooms, I’ve been feeling inspired to spruce up those rooms even more. It’s like when you get a new haircut and you feel inspired to buy a new top too. Or when you have a few bites of chips and salsa and you’re inspired to finish a whole basket.

Our master bedroom has always been a room that’s looked pretty good, but didn’t have enough stuff going on. And by stuff, I mean art. For all the art we have in our house, we only had two pieces in there – not nearly enough!

IMG_7103 copy Which is why we really only ever show this side of the room. It’s pretty finished looking. But the other side of our space has always looked like this.

bedroom art blank small Womp womp. Lotsa black between the dressers and TV and not much else (although I do like our vases from Tarjay and basket from West Elm!)

With all the extra art in our house, there was really no excuse to not put some on that wall. Plus, I’ve never placed art in a space with a sloped ceiling – new challenge!

The way I like to approach gallery walls is how any designer with a Photoshop addiction would: I ‘shop it up before actually doing anything. So I took the above photo of our wall and then took photos of art around the house that I thought could look nice together. Cut out art, paste onto wall, and boom- art gallery mockup (see below).

bedroom art mockup Of course, not everyone has access to Photoshop. But there are other ways to do this folks. One easy method is to use PowerPoint – insert the blank wall photo into a slide, then insert the art photos on top of it. Use the crop tool to crop the art photos in so that no background is showing behind the art. Arrange around wall and marvel at your work.

You could even print out your photos at home and literally cut out the art photos and rearrange them in printed form. You might have to play around with how big you print each art piece so that it is properly sized in relation to the other pieces, but it could work!

Once we had the digital mockup in place, we got out our laser level (Evan has this cool self-leveling one) and started placing things. It was great to be confident in our placement and arrangement of different pieces. Also, Mochi loves laser levels. WAY more than laser pointers.

File_003 Piece by piece we added more art, using the mockup as a guide.

Bedroom art + how to mock up a gallery wall even if you don't have photoshop - evanandkatelyn.com A quick tip – if you’re ever hammering a nail into the wall and it goes in too far, use something thin and flat, like this tiny spatula we had, to protect the wall when you’re pulling the nail out.

File_0030 This was a super quick gallery wall – and it adds a ton of life into the room!

Bedroom art + how to mock up a gallery wall even if you don't have photoshop - evanandkatelyn.com It may seem like a simple change but I think it makes a huge visual difference!

ba After realizing when we did this wall that we had never shared a full view of our room, we snapped some cool fish eye photos with the Go-Pro!

Bedroom art + how to mock up a gallery wall even if you don't have photoshop - evanandkatelyn.com

DCIM100GOPROGOPR0772. Well there you have it! A few ways to mockup a gallery wall before you make it, and some new art now adding color to our master bedroom.

2

Fan vs Evan

Replacing the fan in the master bedroom seemed like a pretty dang easy project. After all, we had already removed a couple fans, so installing one couldn’t be that different right? Ha. Hahaha. We’ll take a moment of silence for Evan’s fingers and then we’ll get started on the post.

IMG_6130

So here’s how the old fan looked in our bedroom. Not absolutely terrible- but we did feel that it really dated the room.

IMG_6105copy

It especially revealed it’s age when you took a closer look. Mmmm, dat glass…

IMG_6107

So Evan, with his height and all, got to work disassembling the fan. He started with the blades and light covers.

IMG_6117 copy

After he removed the base and snipped the wires (don’t worry, the power was off!) we were pretty confident it was going to be smooth sailing. But then we saw these.

IMG_6120 copy

A bunch of nails- NAILS- holding our fan into a ceiling joist. No mounting kit, no screws. This meant it was going to be WAY harder to remove this thing.

Evan finally managed to pry them out, but those five nails cost him about half an hour and the use of his index finger (it’s hard to simultaneously use a hammer and pliers above your head while on a ladder. Would not recommend).

IMG_6129copy

You can see by the multiple gouge marks on the nails (oh and the one that BROKE IN HALF) that this was quite a battle.

The good news is that after this, installing the new fan was a breeze (Ha! A breeze! I’ll see myself out…)

Evan installed the base and the down rod (so that it would hang lower than the ceiling, like our old one). Then I hopped up and spackled/painted around the edges of the base, where we had kinda beat up the ceiling trying to get the old fan out.

IMG_6142 copy

Then it was on with the blades and the lights! :D

IMG_6145 copy

Somehow after that we never took an after picture… so I went and took one today! (Psst, you can check out the details of how our room has evolved over the past year here).

IMG_7103 copy

We feel like the new fan suits the room MUCH better. The brushed silver ties in with the lamps and bed frame, and overall the look is way more sleek and modern. Woohoo!

5

Master Bedroom- lots of little updates

Hi guys! I know I know…. it’s been way too long since we updated. I’m starting to feel like a broken record I’ve said that so many times! The past ten or so months have been crazy since I traded in my freelance slippers for corporate America big girl shoes (i.e. started working full time for a 60,000 person company). So again… my apologies for the terribly sparse updates these days. The good news is, even though we haven’t been posting as often as we’d like, we’re still working on improving our house little by little!

Sometimes we don’t even realize how much a room has changed until we look at the last pictures we took of it. Case in point, our master bedroom. Last time it showed up on the blog, it was looking something like this:

IMG_3313copy

White on white on white, am I right? But then we got a few wedding presents (curtains, lamps, side tables) and it started coming together more and more. We also switched the comforter to an old one I had… which we soon realized was too long for such a low bed.

IMG_6105copy Don’t mind the ladder haha. Unfortunately, this mid-project photo is the only one we have of this phase of the bedroom. Going back to the low bed though, we decided it was maybe time to look at new bed frames. The one in the photo above is from Ikea. It was great for the cost, but it never felt super sturdy and our kitty liked to run back and forth across the top and dig her claws into it.

IMG_6210

So we decided to buy ourselves a nice new bed frame and donate the old one! You can also see in the picture below that we moved the darker curtains to a different room and bought these linen ones from Crate & Barrel.

IMG_6205copy

Of course, Mochi was pretty attached and did not let that headboard go easily… (Also you can see in the photo below how loose the fabric had gotten. Once you take it off and try to wash it, it never goes on quite the same.)

IMG_6208copy

The new bed frame is the stainless steel Portica bed from Room & Board. We love it! It’s modern and sturdy and feels really well made. I was so excited about it I didn’t even finish making the bed before snapping a picture- doh!

IMG_6213copy

Here is how are bedroom currently looks- we got this light comforter from Target and we LOVE it (it’s basically t-shirt material so it’s super comfy). To add some more color, we switched our throw pillow and added some of my coffee filter flowers on the bedside table. To gain some extra storage, we added some baskets from Container Store that fit PERFECTLY into the bottoms of our bedside tables, making the perfectionist in me quite pleased. Also the rug is gone. We loved it… but white rug plus sick kitty = bye bye rug. It was several years old and pretty cheap, so it had a good run! We are looking for something new now to replace it.

IMG_7103 copy

There is one other big change in our bedroom… but that’s a post for next time! In the meantime, enjoy this little side by side before and after :) Looks like our room is growing up!

IMG_7103 BandA copy

1