Tag Archives | garage

Garage storage ideas

In our last garage post (and video) we covered part 1 of our garage series: how we patched, repaired, and painted our very sad looking walls.

DIY garage storage solutions - evanandkatelyn.com In today’s post, we’re covering how we turned that clean slate into something actually functional too. The goal: to be able to use this space as a workshop AND still be able to pull both of our cars in. We took it from this:

DIY garage storage solutions and organization - evanandkatelyn.com To this! Holy crap!!

DIY garage storage solutions - evanandkatelyn.com You can watch the video that covers everything below, or keep scrolling for all our choices, steps, and tips in blog-format.

[Before we keep going, I want to pause and say if you have a second it would mean SO much to us if you’d like our video or subscribe to our channel. Since we’re brand new to YouTube, every view, like, and subscription makes a huge difference for us. Click here to see the whole channel. Thank youuuuu! We’re doing a big goofy happy dance right now!]

And now, all the details and unattractive photos you’ve been waiting for. As you saw in the video, this is where we started…
So the challenge is that we were asking a lot from our little garage. We’re asking it to house two cars, have all the functionality we need for our DIY projects, and act as a workshop for making products. Oh yeah, and be organized and look nice while you’re at it.

When we bought the house, we actually did inherit a decent amount of storage. It was just… not how we would have done it.

There were some pegboards, but they had been cut up and placed around three different spots that didn’t all make sense. For instance, the right side of our garage has a step that gives us a few feet of space between our cars and the wall, so it would be perfect for something that required more space, like shelving. But a big pegboard, which sits more flush against the wall, was taking up half of that wall. And since we had extra space in front of it (and no room anywhere else), stuff always ended up getting piled there. Plus, these pegboards weren’t in the best of shape. They had lots of gouges, unusable holes, and so on.

DIY garage storage solutions - evanandkatelyn.com We inherited some ok shelves too, but the shelves were on brackets that were screwed into drywall (instead of studs) so we couldn’t put too much weight on them. Also, the ones on the left side of our garage made it hard for Evan, who parks on the left, to get out of his car without hitting something, so placement wasn’t always great.

DIY garage storage solutions - evanandkatelyn.com The garage also came sporting some old cabinets and a wire rack, which we planned on sprucing up and continuing to use.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com In addition to these bits and pieces of storage, we’ve added our own over the years. We have a big Uline shelving unit for heavy and big things (if you squint your eyes you can see it behind the wood, cords, and bike).

DIY garage storage solutions - evanandkatelyn.com We bought a small tool storage/work table when we first moved in that we very quickly outgrew.

DIY garage storage solutions - evanandkatelyn.com So then recently we built a giant rolling work table that better suited our needs, but took up a lot of space.

DIY garage storage solutions - evanandkatelyn.com And we built a rolling wood cart to hold extra scrap wood (see it to the right of the work table?).

DIY garage storage solutions - evanandkatelyn.com So I guess what I’m trying to say is… we have a lot of tools and project materials and general garage-y stuff, so we have a lot of storage to try and corral that stuff, but then the storage units themselves just end up being more stuff to take up space. We knew something had to change.

DIY garage storage solutions - evanandkatelyn.com STEP 1: Declutter garage (and fix the walls while we’re at it)

We got rid of as many things as possible. This included a bunch of stuff we never used, plus the storage we decided to ditch. We Craigslisted the black tool table and ripped off the old shelving and pegboards.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Then, as y’all know from our last post/video [LINK], we pulled everything away from the walls so we could patch, repair, and paint them, giving ourselves a clean slate to move forward.

DIY garage storage solutions - evanandkatelyn.com STEP 2: New pegboards

Pegboards are pretty much a garage staple in our minds. Even though we got rid of our old ones, new ones were first on our list of things to buy. You might view pegboards as sort of a basic item without much variance between one and another, which honestly is kinda how I felt before this project, but then we found these:

DIY garage storage solutions - evanandkatelyn.com

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Wall Control pegboards. They’re made of steel, they come in modular panels, they have built-in stand off, they’re incredibly sturdy, and they are just about as pretty as pegboards can be. (Side note, no, they are not sponsors, we just LOVE these things).

Here’s what you’ll need to install them:

DIY garage storage solutions - evanandkatelyn.com We decided to put these on the left side of our garage, because we needed this wall to have storage that was more flush (so Evan could still get out of his car).

DIY garage storage solutions - evanandkatelyn.com These pegboards are made to work with the normal spacing of normal studs in a normal house. What we found in our garage is that the studs were a little off in some places, and really off in others, so they didn’t count as “normal”. To get around this, we used 1×4’s to bridge between our studs.

DIY garage storage solutions - evanandkatelyn.com First, use a stud finder to find your studs.

DIY garage storage solutions - evanandkatelyn.com *wink!

And mark them on the wall.

DIY garage storage solutions - evanandkatelyn.com We had eight feet worth of panels so we got three eight-foot 1×4’s, and placed them horizontally at three different heights because the panels have attachment points at their top, middle, and bottom.

DIY garage storage solutions - evanandkatelyn.com Use a level so your 1×4’s aren’t all kittywampus, and grab a buddy if you can because it helps to have one person holding one end while the other person screws into the other. Screw the pegboards into the boards at their top, middle, and bottom attachment points.

Because the pegboards have built in stand off, screwing them into the boards doesn’t make you lose any usable space like with a traditional pegboard.

DIY garage storage solutions - evanandkatelyn.com Because we bridged the studs, we could attach our pegboards to the 1×4’s without having to worry about hitting a stud.

DIY garage storage solutions - evanandkatelyn.com Each pegboard panel has six attachment points (three on each side) that you’ll need to screw into your 1×4’s.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Then it was just a matter of putting up our tools. There’s something about a fresh pegboard that makes you feel organized and on top of life. DIY garage storage and organization - evanandkatelyn.com

DIY garage storage solutions - evanandkatelyn.com STEP 3: New shelving

Shelves were another item that we still wanted, we just had requirements that the old ones didn’t mean. Mainly, we wanted them to be easily adjustable, and able to hold more weight than our old ones.

We ended up finding this rail and bracket system called EverBilt. It’s kinda like what you might find in a closet system: different lengths of rails and brackets that hook into them. Then you just use wood planks as the shelves themselves.

DIY garage storage solutions - evanandkatelyn.com We love the idea of this because we want to be able to move shelves around easily if we need a different set up in the future.

To install these, you’ll need:

DIY garage storage solutions - evanandkatelyn.com We planned to put all our shelving on the right side of the garage, where we have the stepped up area (because we have a little more space between the wall and the car on that side).

DIY garage storage solutions - evanandkatelyn.com Again, the first step to this project is finding and marking your studs. And again, our studs were really wonky. Like… they seemingly disappeared anywhere above five feet in some areas.

DIY garage storage solutions - evanandkatelyn.com Meaning we had to go with a different part of the wall on this side of the garage, but it was fine and honestly probably worked out even better in the end because it’s closer to where our worktable ended up.

DIY garage storage solutions - evanandkatelyn.com Mark your studs at several different heights and draw a vertical line connecting your marks. You’ll attach the rails vertically along the studs, and you want to make sure you hit the stud with every screw.

DIY garage storage solutions - evanandkatelyn.com Screw a rail into each stud. You’ll need at least two rails obviously, but if you need more weight support or if you’re spanning a wider area, you can do more.

DIY garage storage solutions - evanandkatelyn.com Then all you need to do is add a bracket onto the rails at each height you want a shelf. They just pop right in, super easy.

DIY garage storage solutions - evanandkatelyn.com We used 12 inch deep boards for our shelves, in lengths of 6 feet since that was the widest we could go on this wall. The weight of the boards makes them stay in place pretty solidly on the brackets.

DIY garage storage solutions - evanandkatelyn.com The best thing is if we need to adjust the height of a shelf, it’s so easy to bump the brackets up or down and place the board back on top.

DIY garage storage solutions - evanandkatelyn.com

DIY garage storage solutions - evanandkatelyn.com We used these shelves for things like drawers of safety gear, boxes of extra product and supplies for our pop up shops, and our OCD-embracing screw, nail, and general hardware organizers.

DIY garage storage solutions - evanandkatelyn.com

DIY garage storage solutions - evanandkatelyn.com We ended up living these so much, we added a couple shelves above our pegboards too using some of the short rail lengths (they come in several lengths). We use these for extra wood that’s too long for our rolly cart and items we don’t need frequent access to.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com STEP 3: Track system

Next we added a track system to hold the typical long awkward items you have in a garage, like shovels, rakes, etc. We decided this would go on the left wall next to the pegboards (because these tend to be more flush against the wall too). There are a lot of systems to choose from, but we went with the Rubbermaid FastTrack system. Mainly because it’s got a big variety of hooks, was very modular, and had great reviews.

To install this, you’ll need

DIY garage storage solutions - evanandkatelyn.com First, you guessed it, find and mark your studs. We used the 1×4 trick again to bridge between them.

DIY garage storage solutions - evanandkatelyn.com Then attach the track onto your 1×4. The secondary benefit of using the 1×4 is that it gives a little bit of extra space between the items you’re hanging from the track and your wall, meaning your wall won’t get as dirty or beat up.

DIY garage storage solutions - evanandkatelyn.com The cover should slide right over your track.

DIY garage storage solutions - evanandkatelyn.com Then clip on your hooks. There are all sorts of different types, depending on what you need to hang.

DIY garage storage solutions - evanandkatelyn.com We filled it up pretty fast with brooms, shovels, rakes, trimmers, etc. It can even hold super heavy stuff like our ladder.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com We love how modular and sturdy this is!

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com STEP 4: Wire rack

After installing our new storage, we turned our eye back to our existing storage. This little wire rack has rested humbly in our corner for years and we actually use it, so it was a keeper. But he was dirty, chipped, and slightly off white. So we gave him a good scrubbing and a coat of white semigloss spray paint.

DIY garage storage solutions - evanandkatelyn.com Then we added him on the wall back where he used to be, except this time we screwed him into studs (seriously, it seems like NOTHING in this garage had been attached to studs).

DIY garage storage solutions - evanandkatelyn.com STEP 5: Cabinets

Our cabinets, which came with the house, originally started out pretty much the ugliest brown you could ever imagine. So one day we couldn’t take it any more and we painted them with some white paint we just happened to have on hand. What we didn’t think about was that it was flat paint, so it got really dirty really easily. We had some of our paint leftover from painting the walls, which was Behr Ultra Premium Plus off-the-shelf white in a satin sheen, so we decided to try that.

DIY garage storage solutions - evanandkatelyn.com Hopefully painting them with extra paint won’t come back to bite us in the butt again, but they definitely look better now and are easier to clean!

DIY garage storage solutions - evanandkatelyn.com We also gave the knobs a new coat of paint. They had been painted over so many times that it had built up quite a bit.

DIY garage storage solutions - evanandkatelyn.com To get off the old paint and prep them for a new coat, we used this trick. First, screw a knob onto your drill.

DIY garage storage solutions - evanandkatelyn.com Then use one hand to control the drill, and the other hand to hold emery cloth around the knob. As the drill spins, the cloth sands the paint off the knob.

DIY garage storage solutions - evanandkatelyn.com It’s a little hard to tell in the photo because the old knob color was white and the paint that had gotten on it was white, but it was much smoother!

DIY garage storage solutions - evanandkatelyn.com We spray painted them semigloss white to even them out (I know, seems kinda redundant, but it helped give them a more finished look)

DIY garage storage solutions - evanandkatelyn.com Then we reattached the knobs and called these cabinets done.

DIY garage storage solutions - evanandkatelyn.com STEP 6: Moving stuff into place, DIY dolly shelf, DIY drying racks

The step was kinda like “ok we are basically done, let’s move stuff back, wait let’s DIY a couple things while we’re at it!” So not so much a step we did, more like a series of fortunate distractions as we wrapped this thing up.

DIY garage storage solutions - evanandkatelyn.com We moved our Uline back where it used to live to the left of the cabinets and loaded up our big, heavy items.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com We used to keep extra tile and bricks from the house stacked underneath it, but it was like a breeding ground for cobwebs, dirt, and dead bugs back there because they were so heavy, we could never move them to clean. So we decided to convert an old dolly to a low profile rolling tile storage cart (really, this would work for anything low profile and heavy).

To install this, you’ll need

  • 1/2″ plywood
  • Some extra scrap wood to bring the lower center part level with the ends
  • Screws

DIY garage storage solutions - evanandkatelyn.com The dolly has a higher, padded part on either end, and slightly lower wooden parts across the middle. So Evan cut some 1×4’s down to size so that they could sit on top of the wooden parts and make the middle of the dolly level with the ends of the dolly.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Then we used some 3/4” thick plywood that was just a little wider and longer than the dolly and secured it on top with four screws. We drilled through the plywood, through the 1×4’s, into the wooden part of the dolly’s frame.

DIY garage storage solutions - evanandkatelyn.com We loaded her up with tile and she fit snuggly under our Uline. Now it’s about a billion times easier to move the tile around when we need to. That stuff is HEAVY.

Side note, I looked into it and a dolly like this is only $19. In a lot of cases, that’s cheaper than buying wood + four casters, and it’s already put together for you. So if you’re needing a quick and simple rolling cart, might be worth just getting a dolly and popping some plywood on top!

Next we added our rolling wood cart to the right of the cabinets. We had hoped to put it there, and last minute realized it was about 6 inches too wide (that’s what we get for dreaming big and not measuring). We didn’t get photos of this step, but we cut off some overhanging surface, moved a couple casters, and baaaaarely got it to fit. Woo!

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com The space under the cabinets was begging for our work table, but before rolling it in we took a few to add a little more functionality to it. We use this table for all sorts of projects, including working on our products, which often require time to dry (wet paint, cement that needs to cure, stain that’s soaking in, etc). We used to use the oh so glamorous technique of dismantling cardboard boxes, laying them flat on the floor, and splaying all our drying goodies across those. Which technically worked, but was not space efficient at all.

DIY garage storage solutions - evanandkatelyn.com We were liking our shelves from earlier so much, we got more short rails and more brackets to built a drying rack area under our worktable. We attached the rails to the table legs, popped in the brackets, and used planks of particle board (?????) as shelving. I can’t believe we never thought of this before – it is SUCH a better use of space! No more tip toeing around drying products all over the floors!

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Once our drying rack was loaded up, we rolled the work table under the cabinets and it was literally a perfect fit. I’m kind of in disbelief that this worked. Our Tetris skills of yore were clearly put to good use.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com Moment of Truth

All of our stuff corralled? Check. Usable work space for projects and products? Check. Space to pull in both of our cars?

DIY garage storage solutions - evanandkatelyn.com Check!!!!!!

Y’all. This is for real. And I kinda can’t believe it. Especially when you look back on where this started.

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com We kinda feel like now that our garage is in order, there’s no stopping us. Feel like making a DIY cutting board or a bench? No biggie, our wood is no longer buried under a mountain of disgrace. Need to crank out a new product order? No longer do we have to turn our garage floor into a sea of half-dried items.

DIY garage storage solutions - evanandkatelyn.com Expect a (hopefully) higher frequency of projects, new products, and posts now that this space is functional again!

DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com DIY garage storage solutions - evanandkatelyn.com ………………………………………………………………
You can also find us at:

YouTube (all our DIY videos)
Instagram (sneak peeks @evanandkatelyn)
Patreon (if you wanna support us, but no pressure!)
Pinterest (stuff that inspires us)
Twitter (us, in 140 character doses)
Facebook (be our friend)
Instructables (straight up tutorials)
………………………………………………………………
Note: This post contains affiliate links. Thank you for supporting us!

0

How to patch and repair drywall

We spend a lot of time in our garage, a LOT, but I always cringe when we have to take photos while we’re working on projects/tutorials/etc. Because until recently, it looked like this:

How to patch and repair walls It may just look like clutter, but it goes deeper than that. We tackled this project in two parts, (part two covers how we tackled organizing it and turning it into a workshop), but right now we are going to focus on the biggest problem we faced: The Walls.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com

You can watch the video that covers everything below, or keep scrolling for all our choices, steps, and tips in blog-format.

[Before we keep going, I want to pause and say if you have a second it would mean SO much to us if you’d like our video or subscribe to our channel. Since we’re brand new to YouTube, every view, like, and subscription makes a huge difference for us. Click here to see the whole channel. Thank youuuuu! We’re doing a big goofy happy dance right now!]

Specifically I’m going to cover how to patch holes (tiny ones, medium ones, and big ones), repair your corners (did you know drywall corner tape was a thing?) and paint (we tried oil based paint for the first time and it was not pretty).

1. How to patch holes

This was definitely the biggest part of the project because our walls were in ruh-uh-uff shape. We had hundreds of holes in our walls ranging from the size of a pin to large enough for me to crawl into. So we’ll go over how to fix tiny holes, medium holes, and big holes.

Tiny holes, aka anything smaller than a finger, are the easiest to deal with.

How to patch and repair drywall - evanandkatelyn.com For these you’ll need the following tools/materials:

How to patch and repair drywall - evanandkatelyn.com Start by lightly sanding over the hole with your 150 grit sanding block and wipe off any dust with a paper towel.

How to patch and repair drywall - evanandkatelyn.com Then get a tiny dollop of spackle on your putty knife and press it into the hole. Drag your putty knife across the hole in a few different directions until the spackle is smooth and flush with the wall (this should just take a couple swipes)

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com The spackle we got goes on pink and dries white, so once it’s dry you can do one more layer (if necessary) or paint.

Medium holes that are bigger than your finger but smaller than 6 inches across can be fixed using a drywall patch.

How to patch and repair drywall - evanandkatelyn.com For these you’ll need the following tools/materials:

How to patch and repair drywall - evanandkatelyn.com First use your poking device to scrape away any loose bits of drywall inside your hole.

How to patch and repair drywall - evanandkatelyn.com Then sand with 150 grit sandpaper and wipe it clean with a paper towel.

How to patch and repair drywall - evanandkatelyn.com Find a patch that goes at least an inch or two past your hole on all sides.

How to patch and repair drywall - evanandkatelyn.com Peel the backing off of your patch and press it over your hole. The patches are a thin metal covered with a mess tape and the whole deal is sticky to adhere to your wall.

How to patch and repair drywall - evanandkatelyn.com Now comes the fun part. Yes, this is fun for us.

Get some joint compound on your putty knife and press it over your patch, starting in the middle and feathering it away, making sure to go at least a couple inches past your patch.

How to patch and repair drywall - evanandkatelyn.com Midway through this, I switched to a more bendy putty knife and it made this WAY easier. I dunno how you’re supposed to feather the edge with a stiff putty knife. Bendy knife fo’ life!

How to patch and repair drywall - evanandkatelyn.com Let this dry overnight and then come back and do a second coat. You’ll basically repeat the steps from before. First sand over any rough parts and wipe it down.

How to patch and repair drywall - evanandkatelyn.com Then apply another coat of joint compound. This time you’ll want to feather the edges a little bit past your original application. So basically, the total area you cover is gonna be WAY bigger than the size of the hole you started with.

How to patch and repair drywall - evanandkatelyn.com Most tutorials online will recommend doing a third coat as well. If this was inside our house or in an area that wasn’t going to be potentially covered with shelves/pegboards/various other storage type stuff, we would do three too. But for our garage, we decided two was just fine.

Big holes, aka anything larger than 6 inches across, require a slightly different technique. They’re too big for a patch like we used before, so you’ll actually need to buy a panel of drywall and patch your hole with that.

How to patch and repair drywall - evanandkatelyn.com For these you’ll need the following tools/materials:

How to patch and repair drywall - evanandkatelyn.com First you need to cut a hole around your hole. Which I know seems counterintuitive, but it’ll make it possible for you to patch it with a piece of the drywall panel you bought.

Our hole was really big, and the panel we bought was 2 ft x 2 ft, so we held up the panel over the hole and traced it, that way we knew it would fit.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com If your hole isn’t quite that big, you would do things a little differently. You’d cut a square around your hole, then cut out a piece of your drywall panel that was the same size. You can either measure your square hole and then measure out what you need to cut from the drywall piece, or if the square you cut out is intact you can trace it onto your drywall piece.

That’s probably easier to do than it is to explain in text, so hopefully that wasn’t confusing. End goal: have a square hole in your wall and a square piece of drywall you can pop into said hole.

Once we had the outline of our square, we used a yardstick and utility knife to score along our line. It helps to have one person hold the yardstick and one person cut.

How to patch and repair drywall - evanandkatelyn.com Then we cut through the drywall using our serrated knife.

How to patch and repair drywall - evanandkatelyn.com After it’s cut, you can pull out the drywall chunks so you’re left with  a clean square. Or a a square full of insulation from that one time we blew insulation in our attic.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com You’ll have a rough edge around your cut, so sand it with 150 grit sandpaper and wipe off dust with a paper towel.

How to patch and repair drywall - evanandkatelyn.com Now it’s time to attach your piece of drywall as a patch. You need to attach it to something solid. If you have studs behind your hole like we did, you can screw it into those.

How to patch and repair drywall - evanandkatelyn.com If you don’t have studs, you’ll need to grab a piece of 1×4 and attach it inside the hole to the back of the drywall using 1-1/4″ drywall screws. Then, instead of screwing your drywall piece into the studs, you’ll screw it into that.

How to patch and repair drywall - evanandkatelyn.com So we popped our drywall patch into the hole we cut and screwed it into our studs on either side. We did three screws on the left, three on the right.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com Then we used the mesh drywall tape to tape around the four edges around the patch. It comes in a roll and is similar to the mesh square over the metal patches we used earlier.

How to patch and repair drywall - evanandkatelyn.com Next, it’s time to bust out your joint compound again. Just like we did with the medium holes, apply joint compound over your tape with a putty knife and feather out the edges with a nice wide bendy putty knife.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com Again, we only did two coats of compound because we knew lots of this wall wouldn’t be visible once we got our storage systems up, and because ehhhh it’s just the garage.

Let it dry overnight, then scrape/sand away any rough parts, wipe it down, and repeat with more joint compound, feathering past the edges of your original application.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com 2. How to repair drywall corners

Drywall corner tape is used anywhere two planes of drywall meet (so two walls that meet in a corner, or where a wall meets a ceiling). The cheapo-type had been used in our garage and it was peeling in several places.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com To fix this, you’ll need the following tools/materials:

How to patch and repair drywall - evanandkatelyn.com First use your utility knife to help peel off your old corner tape. Some areas will just peel off if you grab them, but for some it helped to have the knife to get it started.

How to patch and repair drywall - evanandkatelyn.com Sand and wipe down the length of your corner, on both sides that are joining. Wipe off any dust.

How to patch and repair drywall - evanandkatelyn.com Then spray the spray adhesive from about 6 inches away along the corner. This adhesive is specifically made for drywall. Don’t be alarmed, it comes out red.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com It takes a minute or so to become tacky, but you can apply your tape anywhere between 1 and 10 minutes. To apply, cut a length of tape from your roll that’s the same measurement as your corner.

Fold the tape along the crease so that it fits better into your corner.

How to patch and repair drywall - evanandkatelyn.com If one end of the tape is butting up against another corner (like a wall corner butting up against a ceiling corner) snip the ends off at 45 degrees.

How to patch and repair drywall - evanandkatelyn.com Press the corner tape down your corner over your spray adhesive and smooth it as you go. It’s pretty stiff, so getting it smooth isn’t too hard.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com After about half an hour, you can apply joint compound. By now, we had gotten pretty good with this stuff. Spread it along the corner joint and feather it away from the corner.

How to patch and repair drywall - evanandkatelyn.com Let it dry overnight, the sand rough spots, wipe it down, and repeat. As usual, with the second coat feather it out past the first application of joint compound.

How to patch and repair drywall - evanandkatelyn.com 3. Painting!

Holy holes batman – at this point, our walls were finally ready to paint!

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com We used the following tools/materials:

How to patch and repair drywall - evanandkatelyn.com First, we walked around with our 150 grit sanding block and hit any last rough spots. Then we used a huge broom to wipe off the dust and cobwebs from our wall. We had a lot of both,

How to patch and repair drywall - evanandkatelyn.com Our paint does have primer in it, but we had one area in particular that we were a little concerned about that had both water damage and what looked like an explosion of black paint. So this area we primed first with Kilz spray primer just to be safe.

How to patch and repair drywall - evanandkatelyn.com While it dried we started painting other areas of the garage. We used Behr Ultra Premium plus in off the shelf white (in a satin sheen, for easier cleanability).

How to patch and repair drywall - evanandkatelyn.com We first painted large swaths of wall with the paint rollers.

How to patch and repair drywall - evanandkatelyn.com Then we went back and used a small angled brush to get around the edges and into corners that the roller couldn’t get.

How to patch and repair drywall - evanandkatelyn.com Usually, people will edge first and roll second, but I can’t even describe how excited we were to cover those yellowy walls with white so we jumped the gun and rolled first (it’s way faster and more satisfying than edging!)

Side note, if you have to paint over the course of a few days like we did, you can avoid having to wash out your brushes and rollers each night by wrapping them tightly in foil and keeping them in the fridge. Definitely saved us lots of time and mess!

How to patch and repair drywall - evanandkatelyn.com After edging around the door, there was this moment where we looked at the door, looked at each other, and simultaneously decided we gotta paint this door. It was sooooooo yellow looking next to the white walls.

How to patch and repair drywall - evanandkatelyn.com You can see it pretty well in the background of the photo below too. Ick.

How to patch and repair drywall - evanandkatelyn.com Confession – we’ve never used oil based paint before. And our doors/trim had originally been painted with oil based paint, so we went back and forth between covering it with a primer and doing acrylic vs just going over it in oil again. We couldn’t decide, and neither could the internet based on our research. The folks at Home Depot said it would probably be better to use oil paint, so that’s what we did.

We started out dong the trim with our angled brush and we thought hey! This isn’t so bad! Then we tried to do the door and oh lord it was terrible.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com Granted, we weren’t prepared. We started out trying to do the door with a roller, but we didn’t have a roller meant for oil based paint (we didn’t even know that was a thing). It left fuzzies everywhere, which we then tried to pick out/wipe off (only semi-successfully). Then we proceeded to paint the whole door with a brush since that’s all we had, but it had already started to dry in some areas due to our fuzzy-picking fiasco, so it was looking all sorts of messed up.

Luckily, it did smooth out a bit as it dried. Eventually we will try doing a second coat, but for now it is what it is – a learning experience haha. It’s at least better now that it’s white instead of yellow!

How to patch and repair drywall - evanandkatelyn.com After the whole door situation, we just had to get one last hard to reach spot. Never saw myself sticking my head under a 400-something lb water heater, but you gotta do what you gotta do.

How to patch and repair drywall - evanandkatelyn.com It was worth it to get that last paint stroke!

How to patch and repair drywall - evanandkatelyn.com Repairing drywall and fixing up the walls ended up being a big undertaking – I don’t think we realized quite how bad of shape they were in until we were already elbows deep in the project. But it was TOTALLY worth it. Our garage started out a yellowed, peeling, and full-of-holes hot mess. And even though at the end of it there are a still a few minor imperfections (cough looking-at-you-door cough), when we look around it is pretty sweet to look around and see smooth, white walls.

How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com How to patch and repair drywall - evanandkatelyn.com So glad to be done! And now onto my favorite part… how we organized the garage!

How to patch and repair drywall - evanandkatelyn.com ………………………………………………………………
You can also find us at:

YouTube (all our DIY videos)
Instagram (sneak peeks @evanandkatelyn)
Patreon (if you wanna support us, but no pressure!)
Pinterest (stuff that inspires us)
Twitter (us, in 140 character doses)
Facebook (be our friend)
Instructables (straight up tutorials)
………………………………………………………………
Note: This post contains affiliate links. Thank you for supporting us!

0

We are Terrible Garage Parents

Our garage has seen some tough times. At least once a month, in the midst of some big project or after another huge Home Depot or Lowes shopping trip, I think “this is definitely the messiest our garage has ever been” and I snap a picture so that when we finally clean it up, we’ll have a great before and after comparison. But due to the fact that garage clean up keeps getting put on the back burner, what I have is more like like a “before and before and before and before” instead of a “before and after.”

In our defense, we did inherit a decent amount of random garage-y stuff with the house (cans of paint, gardening tools, piles of bricks, etc). But still. There’s really no excuse for this sort of neglect. We’re terrible garage-parents.

Garage Overhaul

The photo above was right after our mega shopping spree at Lowes.

IMG_1014 copy

At this point it was far from its worst. We actually had space to park one car! We did manage to make the garage a little better by building a big worktable Evan bought.

Garage Overhaul

Garage Overhaul

Have I mentioned Mochi likes to insert herself into the middle of all our home endeavors? Especially those involving instructions manuals placed on the floor.

Garage Overhaul

You might also notice in the picture above that our washer and dryer are hanging out in the garage. Seems like it was just yesterday *tear.*

The status of the garage got much worse when the attic project hit. What a disaster zone! Even though we returned the blower and hoses, those trash piles hung out in there for at least a week.

Garage Overhaul

Then we had a bunch of boxes piled up from the attic clean-out and our recent Ikea trip, and our garage looked like a box convention with the best turnout in the history of box conventions.

Garage Overhaul Garage Overhaul

But after one evening of shuffling things around, we at least managed to get everything contained to the perimeter of the area.

Garage Overhaul

And it was the first time since moving in that we could actually fit both of our cars in at the same time!!

IMG_3067

This is for sure not the most exciting before and afters picture-wise, but with temperatures reaching 100 down here in H-town being able to park in our garage makes us both do a happy dance.

3